Enhancing Broadband
| All Products | Modems | Routers | Business | Wireless | Forum | News | Contact Us |
 |
 |
 |
 |
All Products Modems Routers ST PRO ST PRO Firewall ST 510r3 ST 510v4 ST 530 Business Wireless Forum News Press Contact Us |
 |
 |
 |
 |
Disable / Enable the Speedtouch Firewall
If you are running an application or have another device on your network that requires the Speedtouch router to be disabled completely, the floowing instruction will guide you through this process.
It is not recommended that you disable the Speedtouch router firewall unless you have another Hardware or Software firewall to protect you network.
Instructions:
1. Open Command Prompt
2. Type in telnet 10.0.0.1383. Enter the router security username/password if required
4. Type in the following commands
:ip config firewalling off
:saveall
If you require to turn the Speedtouch router back on repeat steps 1-3 and type in:
:ip config firewalling on
:saveall
The Status of the firewall can be checked by typing in :ip config