Enhancing Broadband
| All Products | Modems | Routers | Business | Wireless | Forum | News | Contact Us |
 |
 |
 |
 |
All Products Modems Routers ST PRO ST PRO Firewall ST 510r3 ST 510v4 ST 530 Business Wireless Forum News Press Contact Us |
 |
 |
 |
 |
Hardware Resetting the SpeedTouch 510v4 / ST530
If you require to access your SpeedTouch 510v4 Router but cannot remember your security username/password, or need to erase a configuration you may need to perform a hardware reset.
The Instructions are on page 43 are detailed in the User Guide on the SpeedTouch setup CD, otherwise the instructions in HTML follow:
Instructions:
| 1 | Make sure the SpeedTouch is powered off. |
| 2 | Press the power button once (shortly). |
| 3 | As soon as the Power/System LED is flashing green, press the power button once more (shortly). |
| 4 | The Power/System LED stops flashing to become solid green. After six seconds, it starts flashing green again. Press the power button once more (shortly). |
| 5 | All LEDs flash green once. |
| 6 | The SpeedTouch reboots and will come online with factory default settings. Resetting the system to its factory defaults also involves deleting the configuration profile settings. You will need to reconfigure the system using the SpeedTouch Setup wizard or by uploading the relevant configuration file. |
Note: We take no responsibility for any damages / information
loss that may be done in the process of a Hardware Reset.